Gas Furnaces

York - Upflow	Goodman - Downflow
Luxaire - Upflow	Coleman - Downflow
York - Downflow	Fedders - All Position

York Upflow Gas Furnaces

Click on photo to enlarge	York 80% 80,000 BTU Upflow Natural Gas Furnace
	Heats approximately 1200-1300 sq ft Wide x 28 1/2" Long x 40" Tall Plenum Size : 20" x 20" Efficiency ratings of 80 AFUE attained by using tubular heat exchangers Compact 40" height allows installation in small space confines Electronic hot surface ignition with high reliability and dependability 100% shut off main gas valve for added safety High quality inducer motor for quiet operation Built-in self diagnostics with fault code display Rollout safety control Low unit amp requirement for easy application Standard terminals for controlling humidifiers and EAC's 40VA control transformer fuse protected Easy to connect power and control wiring Cooling relay supplied for easy installation of add-on cooling Multi-speed PSC Direct-drive blower motors to match cooling requirements Adjustable fan-off settings to eliminate "cold-blow" If interested in purchasing this item please email or call us.
	Price: $425.00

Click on photo to enlarge	York 95% 96,000 BTU Upflow Natural Gas Furnace
	Heats 2100 sq ft to 2400 sq ft 24 1/2" Wide x 28 1/2" Long x 40" Tall Plenum size : 20" x 23 Electronic hot surface ignition saves fuel cost with increased dependability and reliability Compact, easy to install, ideal height 40" cabinet, Built-in, high level self diagnostics with fault code display 100% shut off main gas valve for extra safety Hi-tech tubular aluminized steel primary heat exchanger Secondary (condensing) heat exchanger of 29-4C high-grade stainless steel Integrated control module for reliable Economical operation Blower-off delay for cooling SEER improvement Easy to connect power/control wiring Low unit amp requirement for easy replacement application May be installed as either two-pipe (sealed combustion) or single pipe vent (using indoor combustion air) Top intake & vent connection allows installation in narrow locations Induced combustion system with inshot main burners for quiet, efficient operation No special vent termination kit required PSC 4-speed, direct drive motor with large, quiet blower 24V, 40VA control transformer and blower relay supplied for add-on cooling Timed on, adjustable off blower capability for maximum comfort Solid removable bottom panel allows easy application Easy access from front of unit for cleaning, maintenance or service Protection from intake, exhaust or condensate blockage If interested in purchasing this item please email or call us.
	Price: $895.00

Click on photo to enlarge	York 80% 100,000 BTU Upflow Natural Gas Furnace
	Heats 1500 to 1800 Sq Ft 17 1/2 " Wide x 28 1/2" Long x 40" Tall Plenum Size : 16 1/4" x 20" Efficiency ratings of 80 AFUE attained by using tubular heat exchangers Compact 40" height allows installation in small space confines Electronic hot surface ignition with high reliability and dependability 100% shut off main gas valve for added safety High quality inducer motor for quiet operation Built-in self diagnostics with fault code display Rollout safety control Low unit amp requirement for easy application, standard terminals for controlling humidifiers and EAC's 40VA control transformer fuse protected Easy to connect power and control wiring, cooling relay supplied for easy installation of add-on cooling Multi-speed PSC Direct-drive blower motors to match cooling requirements Adjustable fan-off settings to eliminate "cold-blow" If interested in purchasing this item please email or call us.
	Price: $475.00

Click on photo to enlarge	York Affinity 92% 80,000 BTU Upflow Gas Furnace
	Heats 1500 to 1800 Sq Ft 21" W x 28-1/2" L x 40" H Plenum Size: 20" x 20" Compact, easy to install, ideal height 40" cabinet. Hi-tech tubular aluminized steel primary heat exchanger. Secondary (condensing) heat exchanger of 29-4C high-grade stainless steel. Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. 100% shut off main gas valve for extra safety. PSC - four speed, direct drive motor with large, quiet blower. Built-in, high level self-diagnostics wtih fault code display. May be installed as either two-pipe (sealed combustion) or single-pipe vent (using indoor combustion air). Blower-off delay for cooling SEER improvement. Easy to connect power/control wiring. Low unit amp requirement for easy replacement application. Integrated control module for reliable, economical operation. Insulated blower compartment for quiet operation. Induced combustion system with in-shot main burners for quiet, efficient operation. No special vent termination kit required. 24V, 40 VA control transformer and blower relay supplied for add-on cooling. Timed on, adjustable off blower capability for maximum comfort. Internal vent coupling or maximum serviceability. Solid removable bottom panel allows easy application If interested in purchasing this item please email or call us.
	Price: $695.00

Click on photo to enlarge	York Affinity 80% 40,000 BTU Upflow Natural Gas Furnace
	Heats 500 to 800 sq ft Dimensions are 14 1/2" Wide, 28 1/2" Deep, 40" Tall Supply Plenum Size : 13 1/2" x 20" Compact, easy to install, ideal height 40" cabinet. Blower-off delay for cooling SEER improvement. Easy to connect power/control wiring. Built-in, high level self diagnostics with fault code display. Low unit amp requirement for easy replacement application. Integrated control module for reliable, economical operation. Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. Induced combustion system with inshot main burners for quiet, efficient operation. 100% shut off main gas valve for extra safety. Multi-speed PSC, large, quiet direct-drive blower motor to match cooling requirements. 24V, 40 VA control transformer and blower relay supplied for add-on cooling. Hi-tech tubular aluminized steel primary heat exchanger. Timed on, adjustable off blower capability for maximum comfort. Solid removable bottom panel allows easy application. Easy access from front of unit for cleaning, maintenance or service. Insulated blower compartment for quiet operation. Independent door removal for greater durability and ease of access. Low NOx models have been designed to meet specific code requirements. If interested in purchasing this item please email or call us.
	Price: $400.00

Luxaire Upflow Gas Furnaces

Click on photo to enlarge	Luxaire 80% 115,000 BTU Upflow Natural Gas Furnace
	Heats approximately 1800 to 2100 Sq Ft 21 " Wide x 28 1/2" Long x 40" Tall Plenum Size : 20" x 20" Electronic hot surface ignition with high reliability and dependability 100% shut off main gas valve for added safety Rollout safety control Low unit amp requirement for easy application High quality inducer motor for quiet operation Built-in self diagnostics with fault code display Standard terminals for controlling humidifiers and EAC's 40VA control transformer fuse protected Easy to connect power and control wiring Efficiency ratings of 80 AFUE attained by using tubular heat exchangers Cooling relay supplied for easy installation of add-on cooling Multi-speed PSC Direct-drive blower motors to match cooling requirements Adjustable fan-off settings to eliminate "cold-blow" If interested in purchasing this item please email or call us.
	Price: $500.00

York Downflow Gas Furnaces

Click on photo to enlarge	York Affinity 9.V 92% 80,000 BTU Downflow Furnace
	Heats 1,400 to 1,800 sq ft. 92% high efficient Two stage gas valve and inducer operation Variable speed ECM blower operation Provides increased comfort level & very quiet unit operation Adjustable delay timer allows two stage operation with single stage thermostat Compact, easy to install, ideal height 40" cabinet Blower-off delay for cooling SEER improvement Easy to connect power/control wiring Built-in, high level self diagnostics with fault code display Low unit amp requirement for easy replacement application Integrated control module for reliable, economical operation May be installed as either two-pipe (sealed combustion) or single pipe vent (using indoor combustion) Top intake & vent connection allows installation in narrow locations Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. Induced combustion system with inshot main burners for quiet, efficient operation No special vent termination kit required 100% shut off main gas valve for extra safety 24v, 40VA control transformer and blower relay supplied for add-on cooling Hi-tech tubular aluminized steel primary heat exchanger Secondary (condensing) heat exchanger of 29-4C high grade stainless steel Timed on, adjustable off blower capability for maximum comfort Independent door removal for greater durability and ease of access Easy access from front of unit for cleaning, maintenance or service Protection from intake, exhaust or condensate blockage Insulated blower compartment for quiet operation 3-way transition facilitates fresh air piping If interested in purchasing this item please email or call us.
	Price: $600.00

Click on photo to enlarge	York 95% 64,000 BTU Downflow Natural Gas Furnace
	Heats 1000 to 1400 sq ft. Dimensions are 21" Wide, 28 1/2" Deep, 40" Tall Supply Plenum Size : 18 1/2" x 19 3/4" Bottom Return Plenum Size : 19 3/4" x 20" Compact, easy to install, ideal height 40" cabinet Blower-off delay for cooling SEER improvement. Easy to connect power/control wiring. Built-in, high level self diagnostics with fault code display. Low unit amp requirement for easy replacement application. Integrated control module for reliable, economical operation. May be installed as either two-pipe (sealed combustion) or single pipe vent (using indoor combustion air) Top intake & vent connection allows downflow installation in narrow locations. Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. Induced combustion system with inshot main burners for quiet, efficient operation. No special vent termination kit required. 100% shut off main gas valve for extra safety. PSC four speed, direct drive motor with large, quiet 1600 CFM blower 24V, 40 VA control transformer and blower relay supplied for add-on cooling. Hi-tech tubular aluminized steel primary heat exchanger. Secondary (condensing) heat exchanger of 29-4C high-grade stainless steel. Timed on, adjustable off blower capability for maximum comfort. Easy access from front of unit for cleaning, maintenance or service. Protection from intake, exhaust or condensate blockage. If interested in purchasing this item please email or call us.
	Price: $795.00

Click on photo to enlarge	York Affinity 9.V 92%100,000 BTU Downflow Furnace
	Heats 1800 to 2200 sq ft. Dimensions are 21" Wide, 28 1/2" Deep, 40" Tall. Supply Plenum Size : 18 1/2" x 19 1/4". Bottom Return Plenum Size : 19 3/4" x 20". Two stage heating operation includes: Two stage gas valve and two stage inducer operation. Provides increased comfort level & very quiet unit operation. Adjustable delay timer allows two stage operation with single stage thermostat. Compact, easy to install, ideal height 40" cabinet. Blower-off delay for cooling SEER improvement. Easy to connect power/control wiring. Built-in, high level self diagnostics with fault code display. Low unit amp requirement for easy replacement application. Integrated control module for reliable, economical operation. May be installed as either two-pipe (sealed combustion) or single pipe vent (using indoor combustion air). Top intake & vent connection allows installation in narrow locations. Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. Induced combustion system with inshot main burners for quiet, efficient operation. No special vent termination kit required. 2000 CFM Variable Speed Blower. 100% shut off main gas valve for extra safety. 24V, 40 VA control transformer and blower relay supplied for add-on cooling. Hi-tech tubular aluminized steel primary heat exchanger. Secondary (condensing) heat exchanger of 29-4C high-grade stainless steel. Timed on, adjustable off blower capability for maximum comfort. Independent door removal for greater durability and ease of access. Easy access from front of unit for cleaning, maintenance or service. Protection from intake, exhaust or condensate blockage. Insulated blower compartment for quiet operation. 3-way transition facilitates fresh air piping. ClimaTraK comfort system allows dealer to customize comfort settings based on regional location. If interested in purchasing this item please email or call us.
	Price: $700.00

Goodman Downflow Gas Furnaces

Click on photo to enlarge	Goodman 70,000 BTU 80% Downflow Natural Gas Furnace
	Heats 1,100 sq ft to 1,200 sq ft Input : 56,000 BTU; Output: 70,000 BTU Dimensions: 14"W x 28"D x 39"H; Vent size: 4" Plenum Size: 12 1/2 " x 20" Weight: 130 Corrosion-resistant, aluminized-steel furnace tubular heat exchanger Energy-saving, reliable furnace hot surface ignition system with patented adaptive learning algorithm to maximize igniter life Aluminized furnace steel inshot burners Energy-saving PSC, multi-speed, direct drive furnace blower motor Heater has quiet, corrosion-resistant induced draft blower assembly Integrated furnace control with diagnostics Low voltage terminal blocks Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air 40VA transformer for heating and air conditioning control service Combination redundant furnace gas valve and regulator Completely assembled, factory run-tested furnace for heating or combination heating/cooling application Specific Goodman furnace models comply with California NOx Standards (models that end in "X") Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish Attractive architectural gray paint finish Foil-face insulation lines the furnaces' heat exchanger compartment Convenient left or right connection for gas and electric service This gas furnace has removable, solid-bottom block off Meets CSA Standards If interested in purchasing this item please email or call us.
	Price: $425.00

Coleman Downflow Gas Furnaces

Click on photo to enlarge	Coleman Echelon 9.M 92% 80,000 BTU Downflow Natural Gas Furnace
	Heats 1400 to 1800 sq ft Dimensions are 21" Wide, 22 1/8" Deep, 40" Tall Supply Plenum Size : 18 1/2" x 20" Return Plenum Size : 19 3/4" x 20" Modulating heating operation includes: Modulating gas valve , & Modulating inducer operation Provides increased comfort level & very quiet unit operation Compact, easy to install, ideal height 40" cabinet. Blower-off delay for cooling SEER improvement. Easy to connect power/control wiring. Built-in, high level self diagnostics with fault code display. Low unit amp requirement for easy replacement application. Integrated control module for reliable, economical operation. High velocity filter available for easy field installation. May be installed as either two-pipe (direct vent) or single pipe vent (using indoor combustion air) Top intake & vent connection allows installation in narrow locations. Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. Induced combustion system with inshot main burners for quiet, efficient operation. No special vent termination kit required. 100% shut off main gas valve for extra safety. PSC - four speed, direct drive motor with large, quiet blower. 24V, 40 VA control transformer and blower relay supplied for add-on cooling. Hi-tech tubular aluminized steel primary heat exchanger. Secondary (condensing) heat exchanger of 29-4C high-grade stainless steel. Timed on, adjustable off blower capability for maximum comfort. Independent door removal for greater durability and ease of access. Easy access from front of unit for cleaning, maintenance or service. Protection from intake, exhaust or condensate blockage. Insulated blower compartment for quiet operation. If interested in purchasing this item please email or call us.
	Price: $695.00

Fedders All Position Gas Furnace

Click on photo to enlarge	Fedders 35,000 BTU All Position Natural Gas Furnace
	The unique F80 All-Position Furnace is designed with the contractor and consumer in mind. Perfect in an attic, utility room, closet, alcove or basement. Heats 700 to 750 sq ft. Dimensions: 14 1/2 Wide x 28 1/4 " Deep x 35" Tall Supply Plenum: 13 1/2 " x 19 1/2 " Weight: 105Lbs Designed for all-position installation: upflow, downflow and horizontal Quality design provides all the features of higher cost competitive units at a more reasonable price All models comply with California low NOX (an added cost option on competitors’ products) 3 position inducer capability Heavy-duty aluminized tubular heat exchanger is tested to double the standard requirements for life cycle testing with no signs of wear or corrosion Industry proven integrated hot surface ignition control with igniter and flame sensor positioned in coolest part of flame for ultimate performance and longevity Aluminized-steel multi-port inshot burners provide smooth ignition coupled with superior flame stability, low noise and reliability Low voltage terminal blocks Left or right hand gas and electrical entry Multi-speed PSC, direct drive blower motors to match your cooling requirements Industry proven integrated furnace control with built in self diagnostics Not Approved for Mobile Home Use If interested in purchasing this item please email or call us.
	Price: $335.00

LP conversion available on all models, additional fees will apply.

Products

Other Links

Fedex Freight

R&L Carrier